P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact

NovaFlex Silicone Tile Grout is a non-corrosive, non-flowable paste that cures to a rubber-like solid when exposed to atmospheric moisture.

This single-component material requires no mixing and is specially formulated for grouting the joints between ceramic tiles. NovaFlex Silicone Tile Grout is an attractive, longer-lasting durable alternative to typical cement grouting.

  • Low odor
  • Mold & mildew resistant
  • Easy troweling and tooling
  • Skins over in 10 – 30 minutes
  • Completely cured in 24 hours
  • Never any cracking or chipping
  • Colored from the factory – no mixing required
  • Made in USA
  • REACH
  • Sulphur Free
  • UV Resistant
How to Buy
  • Details

    NovaFlex Silicone Tile Grout retains its flexibility and will not crack or drop out of joints. It develops tenacious adhesion to most common pool and spa substrates including:

    • Ceramic tile
    • Gel coat
    • Porcelain
    • Metal
    • Glass
    • Masonry
    • Fiberglass

    As with all single component materials, work life and cure time of NovaFlex Silicone Tile Grouts are dependent upon environmental conditions such as temperature, humidity, and application thickness. Adhesion should be checked on small samples prior to full-scale production.

  • Packaging
    This product is available in the following formats:
    • 10 ounce cartridge
  • Specifications
    • Product Specifications
      Appearance Viscosity Extrusion Rate
      1/8” Orifice @ 50 psi
      Skin Over Time
      3/8” @ 50% RH & 77°F
      Through Cure
      3/8” @ 50% RH & 77°F
      Paste (White, Gray, and Tan) 1,500 – 3,700 poises (Brookfield #7 @ 10 rpm) -- 10 – 30 minutes 24 hours
    • Typical Properties
      Slump (Flow) Specific Gravity Tensile Strength
      ASTM D412
      Elongation
      ASTM D412
      Tear Resistance
      ASTM D624
      Shore Hardness
      ASTM D2240
      Service Temperature Application Temperature Adhesion
      ASTM D903
      Peel Strength
      STM C974
      Green Strength
      ASTM C1135
      Joint Sealant Designation
      ASTM C920
      No Slump 1.00 – 1.05 140 – 160 psi 400 – 500% 20 – 25 pli 20 +/- 5 -40°F to 400°F (-40°C to 204°C) -- Glass: 12 – 15 pli Aluminum: 10 – 14 pli Lexan®: 12 – 15 pli -- -- --
    • Industry Specifications
      Specifications
      --
  • Downloads
Have an inquiry or need a solution?