P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact

G662 can be used as an alternative to Molykote 111 Compound (Dow Corning’s DC111).

Versilube G662 is from our family of general-purpose silicone greases thickened with inorganic fillers for lubrication and insulation, which are resistant to oxidation and thermal degradation. G662 seals and protects electrical connections above and below ground, and is certified to NSF Standard 61 for Drinking Water System Components. The material’s unique dual nature, lubricity, and sealing, supports a long list of applications, from a valve and O-ring lubricant in small, hydraulic piston assemblies to high vacuum sealant in laboratory services.

G662 is particularly applicable for potable water systems, water filtrations systems, and potable water pumps. G662 and Novagard’s G661 can be used as an alternative to Molykote 111 Compound (Dow Corning’s DC111).

  • Made in USA
  • REACH
  • Sulphur Free
  • VOC Compliant
How to Buy
  • Applications
    • low speed/movement
    • thread protector
    • metal to rubber, rubber to plastic, & metal to plastic lubrications
    • high temp operation
    • low temp operation
  • Details

    Certified to NSF Standard 61 for Drinking Water System Components, G662 has a temperature range of -40°C to 204°C.

    • oxidation resistant
    • water resistant
    • non-polar solvent soluble
    • dielectric
    • corrosion protection
    • vacuum resistant
  • Packaging
    This product is available in the following formats:
    • 3 ounce tube
    • 5 ounce tube
    • 1 gallon pail
    • 5 gallon pail
    • 55 gallon drum
    • 20 gram packet
  • Specifications
    • Product Specifications
      Appearance Penetration Bleed Evaporation
      Translucent Paste 200 - 300 1.0% maximum @ 200°C/24 hours 2.0% maximum @ 200°C/24 hours
    • Typical Properties
      Specific Gravity Volume Resistivity Dissipation Factor Dielectric Constant Water Washout Dielectric Strength Low Temperature Torque
      1.02 – 1.06 4.0 x 1014 Ω/cm3 0.0016 2.2 (@ 1 Khz) < 1.0 % 10 mil gap: 800 v/mil Start (-54°C/-65°F): 944 gm-cm
      Running (-54°C/-65°F): 885 gm-cm
    • Attributes
      Oxidation Resistant Water Resistant Non-Polar Solvent Soluble Corrosion Protection Moisture Resistant Vacuum Resistant
    • Applications
      Low Speed/Movement Thread Protector Metal to Rubber Metal to Plastic Rubber to Plastic High Temp Operation Low Temp Operation
    • Standard
      Standard
      NSF Standard 61

    Alternative to: DC111

  • Downloads
Have an inquiry or need a solution?