400-155 High Strength Oxime-cure Silicone Paste
400-155 is a non-flowable, non-sagging paste product that is ideal for industrial applications that require superior bond strength and moisture resistance.
400-155 is one of our single-component, moisture-curing silicone pastes that cures to a low to medium modulus, rubber-like solid. The cure mechanism is neutral (oxime), curing on exposure to moisture in room temperature air. It is non-corrosive to metal substrates such as copper, aluminum, and ferrous metals (with adequate ventilation), and offers excellent adhesion to numerous substrates including plastics and metals.
This ready-to-use adhesive sealant skins over in 5 – 15 minutes, and has a tensile strength of minimum 200 psi after fully cured. 400-155 is well suited to sealing and bonding applications within many arenas.
-
Applications
- High strength bonding
- Deep section cure applications
-
Details
Specially formulated to retain its physical properties even during service in extreme environmental conditions, 400-155 offers outstanding resistance to gasoline, brake fluid, antifreeze, and most wheel cleaners.
-
Packaging and Lead Times
This product is available in the following formats:
- 10 ounce cartridge
- 55 gallon drum
Lead times are:
- 10 business days
-
Specifications
-
Physical Properties
Form Cure Chemistry Appearance Specific Gravity Extrusion Rate Skin-Over Time (min) Cure Time Durometer Shore A Tensile Strength (psi) Elongation (%) High Strength Oxime Cure Translucent 1.00 – 1.05 >40 g/min @ 50 psi 5 – 15 3 – 6 20 – 40 >200 >300
-
Physical Properties
- Downloads
