P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact
Contact
SUGGESTED SEARCHES

NovaFlex Seam Sealer

Ideal for applications requiring the coating to flow into small crevices and hard to reach areas, NovaFlex Seam Sealer is a semi-self-leveling liquid that cures to a rubber-like solid which will not crack or drop out of joints.

NovaFlex Seam Sealer is a non-corrosive, single-component silicone sealant that is ideal for applications that require the coating to flow into small crevices and hard to reach areas. It may also be used as a horizontal joint sealant and crack filler.

  • Low odor
  • Semi self-leveling
  • Neutral cure
  • Quick drying
  • Permanently flexible
  • Made in USA
  • Proposition 65
  • Sulphur Free
  • UV Resistant
  • VOC Compliant
  • AAMA
How to Buy
 
  • Details

    We recommend it for sealing rivets, gutters, corner joints, and screw heads. Please note: due to the flowable nature of Seam Sealer, it may not be suitable for use on vertical joints unless tooled immediately after application. Consider NovaFlex Void & Cavity Filler for vertical applications.

    Not recommended for joints continuously submerged under water, areas needing paint or stain, spaces confined from atmospheric moisture during cure, on surfaces that might bleed oils, plasticizers, or solvents, in structural glazing applications, or painted applications.

    Meets or exceeds the performance characteristics of AAMA 803.3, Type II.

  • Packaging and Lead Times
    This product is available in the following formats:
    • 10 ounce cartridge
    • 55 gallon drum

    Lead times are:
    • 10 business days
  • Specifications
    • Product Specifications
      Appearance Viscosity Extrusion Rate
      1/8” Orifice @ 50 psi      		 Skin Over Time
      3/8” @ 50% RH & 77°F      		 Through Cure
      3/8” @ 50% RH & 77°F
      Semi-Self Levelling Fluid (Various Colors) 700 – 1,100 poises (RVT Spindle #7 @ 20 rpm)
      1,000 – 1,350 poises (RVT Spindle #7 @ 10 rpm)      		 -- <30 minutes maximum 24 – 48 hours
    • Typical Properties
      Slump (Flow) Specific Gravity Tensile Strength
      ASTM D412       		Elongation
      ASTM D412      		 Tear Resistance
      ASTM D624      		 Shore Hardness
      ASTM D2240      		 Service Temperature Application Temperature Adhesion
      ASTM D903      		 Peel Strength
      STM C974       		Green Strength
      ASTM C1135      		 Joint Sealant Designation
      ASTM C920
      N/A 1.05 – 1.20 200 psi 250% -- 20 +/- 5 -40°F to 400°F (-40°C to 204°C) -20°F to 160°F (-29°C to 71°C) Glass: >15 pli Aluminum: >15 pli -- -- --
    • Industry Specifications
      Specifications
      AAMA 803.3 and Type II
  • Downloads
Have an inquiry or need a solution?
Contact Us