P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact
Contact
SUGGESTED SEARCHES

NovaFlex Ultra-Low Migration High Impact Sealant

NovaFlex Ultra-Low Migration High Impact Glazing Sealant was developed for systems looking to achieve Florida Product Approval, HVHZ, or Miami Dade NOA.

Developed as an ultra-low migration sealant to help prevent migration of materials that could have a negative effect on IG and surrounding components performance. NovaFlex Ultra-Low Migration High Impact Glazing Sealant develops a sure bond to most substrates, and offers extremely high tensile strength to provide the longest lasting seal possible for high impact windows.

  • High tensile strength
  • Low reactivity
  • Excellent UV and chemical resistance
  • Deep section cure
  • Excellent primerless adhesion to various substrates
  • High elongation
  • Made in USA
  • Proposition 65
  • Sulphur Free
  • UV Resistant
  • VOC Compliant
  • AAMA
How to Buy
 
  • Details

    NovaFlex Ultra-Low Migration High Impact Glazing Sealant is a non-corrosive, single-component, neutral cure silicone sealant and/or adhesive. A non-flowable paste, it is designed to have ultra-low plasticizer migration. This protects the IG and other window components from attack and degradation. This conforms to the new recommendation of IG manufacturers on all Impact Window fabrication to ensure a long-lasting seal.

    Ultra-Low Migration High Impact Glazing Sealant was developed for window systems seeking to achieve Florida Product Approval, HVHZ, Miami Dade NOA, and other glazing applications requiring high tensile strength.

    Ultra-Low Migration High Impact Glazing Sealant is available in translucent, gray, or black, or can be custom matched to any color.

    Meets or exceeds the performance characteristics of ASTM C1184 and AAMA 803.3 (I), 808.3.

  • Packaging and Lead Times
    This product is available in the following formats:
    • 10 ounce cartridge
    • 20 ounce sausage
    • 55 gallon drum

    Lead times are:
    • 10 business days
  • Specifications
    • Product Specifications
      Appearance Viscosity Extrusion Rate
      1/8” Orifice @ 50 psi      		 Skin Over Time
      3/8” @ 50% RH & 77°F      		 Through Cure
      3/8” @ 50% RH & 77°F
      Paste (Various Colors) 5,000 – 15,000 poises (Brookfield #7 @ 10 rpm) 30 – 60 grams/minute 5 – 10 minutes 48 hours (28 days for OEM window applications)
    • Typical Properties
      Slump (Flow) Specific Gravity Tensile Strength
      ASTM D412       		Elongation
      ASTM D412      		 Tear Resistance
      ASTM D624      		 Shore Hardness
      ASTM D2240      		 Service Temperature Application Temperature Adhesion
      ASTM D903      		 Peel Strength
      STM C974       		Green Strength
      ASTM C1135      		 Joint Sealant Designation
      ASTM C920
      No Slump 1.05 – 1.10 400 – 500 psi 400 – 500% 30 – 35 pli 40 +/- 5 -40°F to 400°F (-40°C to 204°C) -20°F to 160°F(-29°C to 71°C) Glass: 14 – 18 pli Aluminum: 14 – 18 pli Wood: 14 – 18 pli -- -- --
    • Industry Specifications
      Specifications
      AAMA 803.3 (I) and 808.3
  • Downloads
Have an inquiry or need a solution?
Contact Us