P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact
SUGGESTED SEARCHES

200-202 Oxime-cure Flowable Silicone

200-202 is a single-component, oxime-cure silicone for use in applications where the coating needs to flow into small crevices and hard to reach areas.

Coating intricate electrical and mechanical devices, insulating electrical terminals, and thin section potting are a few of the many applications in which our 200 Series products may be used. These products have good adhesion to most common substrates, and will not corrode aluminum, copper, and ferrous metals (with adequate ventilation).

  • Utilizes a moisture cure system at room temperature to result in a tough, resilient, silicone rubber
  • Retain enough thixotropy to prevent leakage during the cure cycle
  • Superior UV resistance

200-202 has a viscosity of 20,000 – 35,000 cPs and skins over in <20 minutes. A conformal coating, 200-202 is preferable to paste-consistency products where flow coating is the chosen application method and when flow into small crevices and hard-to-reach places is desired.

  • Made in USA
  • Proposition 65
  • UV Resistant
  • VOC Compliant
How to Buy
 
  • Applications
    • Pin/solder joint coverage
    • Thin section encapsulation
    • Sealing and bonding applications where low viscosity and self-leveling properties are required
  • Details

    Ready-to-use, 200-202 is an oxime-cured silicone used for general industrial sealing and bonding applications requiring a flowable product.

    • Unprimed adhesion to a variety of industrial substrates
    • Low odor and solvent-free with no isocyanates
    • Excellent adhesion
  • Packaging and Lead Times
    This product is available in the following formats:
    • 10 ounce cartridge
    • 5 gallon pail
    • 55 gallon drum

    Lead times are:
    • 10 business days
  • Specifications
    • Physical Properties
      FormCure ChemistryElectronics GradeAppearanceSpecific GravityViscosity (cPs)Skin-Over Time (min)Cure TimeDurometer Shore ATensile Strength (psi)Elongation (%)
      Semi-Self-LevelingOxime CureYesBlack Liquid0.95 – 1.0120,000 – 35,000 (Brookfield #6 @ 10 rpm)<2057 – 63 (hours)15 +/-550 – 100245 – 300
    • Electrical Properties
      Dielectric StrengthDielectric Constant at 100 HzDielectric Constant at 100 kHzDissipation Factor at 100 HzDissipation Factor at 100 kHzVolume Resistivity (Ω cm)
      17.5 kV/mm
      446 V/mil      		2.722.700.00340.0021

      (@20V) 5.74 x 1012
      (@100V) 2.92 x 1013

  • Downloads
Have an inquiry or need a solution?
Contact Us