400-118 High Strength Oxime-cure Silicone Paste
400-118 is a non-flowable, non-sagging paste product that is ideal for industrial applications that require superior bond strength and moisture resistance.
400-118 is one of our single-component, moisture-curing silicone pastes that cures to a low to medium modulus, rubber-like solid. The cure mechanism is neutral (oxime), curing on exposure to moisture in room temperature air. It is non-corrosive to metal substrates such as copper, aluminum, and ferrous metals (with adequate ventilation), and offers excellent adhesion to numerous substrates including plastics and metals.
This ready-to-use adhesive sealant skins over in 3 – 10 minutes, and has a tensile strength of 300 – 400 psi after fully cured. 400-118 is well suited to sealing and bonding applications within many arenas.
-
Applications
- High strength bonding
- Deep section cure applications
-
Details
Specially formulated to retain its physical properties even during service in extreme environmental conditions, 400-118 offers outstanding resistance to gasoline, brake fluid, antifreeze, and most wheel cleaners. Meets specifications for Chrysler MSCD135, GM 9985557, and GMW18180.
-
Packaging and Lead Times
This product is available in the following formats:
- 10 ounce cartridge
- 5 gallon pail
- 55 gallon drum
Lead times are:
- 10 business days
-
Specifications
-
Physical Properties
Form Cure Chemistry Appearance Specific Gravity Extrusion Rate Skin-Over Time (min) Cure Time Durometer Shore A Tensile Strength (psi) Elongation (%) High Strength Oxime Cure Gray Paste 1.04 – 1.16 >100 g/minute @ 90 psi 3 – 10 2 – 24 hours (1/8” @ 50% RH & 77°F) 20 – 45 300 – 400 300 – 500 -
Specifications
Specifications Chrysler MSCD135
GM 9985557
GMW 18180
-
Physical Properties
- Downloads
