P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact
SUGGESTED SEARCHES

NovaFlex Pitch Pocket Penetration Sealant

A ready-to-use, moisture cured, sealant for pitch pans and other penetration seals, NovaFlex Pitch Pocket Penetration Sealant is semi self-leveling, while viscous enough to avoid drain-out issues.

It dries to an elastomeric, rubber-like solid, and can be applied in damp, dry, or cold climates.

  • Rainproof in 1 hour (70°F/50% RH)
  • Applies down to 10°F
  • Will not shrink upon curing
  • No mixing required
  • No special tools required
  • Solvent free, contains no isocyanates
  • 5 year limited warranty
  • Made in USA
  • Proposition 65
  • REACH
  • Sulphur Free
  • UV Resistant
  • VOC Compliant
How to Buy
 
  • Details

    NovaFlex Pitch Pocket Penetration Sealant is a single-component, semi self-leveling sealant that provides a water-resistant, flexible seal, yet is viscous enough to avoid drain-out issues encountered with products that have a more liquid consistency. There is no outgassing or bubbling on damp surfaces, which is common with urethane products. This professional grade sealant adheres to:

    • Metal
    • Asphalt
    • BUR (tar and gravel)
    • Concrete
    • Metal Roofs, including PVDF
    • SBS
    • Tiles
    • Aluminum
    • Galvanized Steel
    • Brick
    • Concrete
    • EPDM (aged or primed)
    • TPO (aged or primed)
    • PVC (aged or primed)
    • CSPE/Hypalon (aged or primed)
    • Gypsum Board
    • Wood
    • Fiberglass
  • Packaging and Lead Times
    This product is available in the following formats:
    • 20 ounce sausage

    Lead times are:
    • 10 business days
  • Specifications
    • Product Specifications
      AppearanceViscosityExtrusion Rate
      1/8” Orifice @ 50 psi      		Skin Over Time
      3/8” @ 50% RH & 77°F      		Through Cure
      3/8” @ 50% RH & 77°F
      Flowable (Various Colors)750 – 1,250 poises (Brookfield #7 @ 10 rpm)--15 – 45 minutesDepends on thickness
    • Typical Properties
      Slump (Flow)Specific GravityTensile Strength
      ASTM D412      		Elongation
      ASTM D412      		Tear Resistance
      ASTM D624      		Shore Hardness
      ASTM D2240      		Service TemperatureApplication TemperatureAdhesion
      ASTM D903      		Peel Strength
      STM C974      		Green Strength
      ASTM C1135      		Joint Sealant Designation
      ASTM C920
      --1.13 – 1.1560 – 80 psi1,200 – 1,450%12 – 17 pli5 +/- 2-40°F to 400°F (-40°C to 204°C)-20°F to 160°F(-29°C to 71°C)ALUMINUM: Cohesive failure
      WOOD: Cohesive failure
      PVC: Cohesive failure      		------
    • Industry Specifications
      Specifications
      --
  • Downloads
Have an inquiry or need a solution?
Contact Us