We will be closed 11/24 and 11/25 for the Thanksgiving holiday.

P E R F O R M A N C E   S I L I C O N E S   |   W O M A N   O W N E D
Contact

200-202 is a single-component, oxime-cure silicone for use in applications where the coating needs to flow into small crevices and hard to reach areas.

Coating intricate electrical and mechanical devices, insulating electrical terminals, and thin section potting are a few of the many applications in which our 200 Series products may be used. These products have good adhesion to most common substrates, and will not corrode aluminum, copper, and ferrous metals (with adequate ventilation).

  • Utilizes a moisture cure system at room temperature to result in a tough, resilient, silicone rubber
  • Retain enough thixotropy to prevent leakage during the cure cycle
  • Superior UV resistance

200-202 has a viscosity of 20,000 – 35,000 cPs and skins over in zero – 20 minutes. A conformal coating, 200-202 is preferable to paste-consistency products where flow coating is the chosen application method and when flow into small crevices and hard-to-reach places is desired.

  • Made in USA
  • Proposition 65
  • UV Resistant
  • VOC Compliant
How to Buy
 
  • Applications
    • Pin/solder joint coverage
    • Thin section encapsulation
    • Sealing and bonding applications where low viscosity and self-leveling properties are required
  • Details

    Ready-to-use, 200-202 is an oxime-cured silicone used for general industrial sealing and bonding applications requiring a flowable product.

    • Unprimed adhesion to a variety of industrial substrates
    • Low odor and solvent-free with no isocyanates
    • Excellent adhesion
  • Packaging and Lead Times
    This product is available in the following formats:
    • 3 ounce tube
    • 10 ounce cartridge
    • 5 gallon pail
    • 55 gallon drum

    Lead times are:
    • 20 business days
  • Specifications
    • Physical Properties
      Form Cure Chemistry Appearance Specific Gravity Viscosity (cPs) Skin-Over Time (min) Durometer Shore A Tensile Strength (psi) Elongation (%)
      Self-Leveling Oxime Cure Black 0.95-1.01 20,000-35,000 0-20 15 +/-5 50-100 245-300
  • Downloads
Have an inquiry or need a solution?